Attribution

Original work

• Title: Waveshare ESP32-P4-NANO case and board model
• Author: MartinFaustMayer (@MartinFaustMa_212591) on Printables
• Source: https://www.printables.com/model/1497431-waveshare-esp32-p4-nano-case-and-board-model
• Licence: Creative Commons Attribution 4.0 International (CC BY 4.0), https://creativecommons.org/licenses/by/4.0/

Changes made to the original

This work is an adaptation of the original. Changes:

1. The lid ("top-solid"): the unused openings in the top plate (the slot along the left edge, two long slots, three small windows and the slot along the right wall) were closed. The Ethernet window at the back of the lid was left open.
2. The lid: the Helrig symbol was debossed 0.6 mm into the top face, and the Helrig wordmark was debossed 0.6 mm into the left and right side walls.
3. The lid mesh had a sub-micron vertex mismatch (about 0.0000005 mm) and zero-area triangles. These were welded and removed so the mesh is watertight. This does not change the shape.
4. Multi-colour variant only: extra STL parts (inlays) that exactly fill the branding recesses, and the lid is rotated top face down for printing.
5. The bottom part is unchanged.

All other geometry of the original is kept: the openings in the walls (USB ports, Ethernet notch), board standoffs, clips and tolerances.

This repository

The STL files and preview images in this repository are shared under the same licence as the original, CC BY 4.0. You may share and adapt them, including commercially, if you give credit to the original author as above, link to the licence, and indicate if you made changes.

The original author has not endorsed this adaptation.